Punch Locator Drill Guide
44 sold in last 5 hours
$39.95
$80.00
save 50%
Hurry, low quantity!Hurry! – Only 10 left in stock.
DESCRIPTION
This template lets you measure out perfect hole positions for cabinet handles, pulls, and knobs. Simply slide guides and stop along rulers, tighten thumb screws and drill. It is the core unit of the complete drilling system. Quick, Easy Adjustments – A multiple purpose template for precise installation of Pulls/Knobs on drawers and doors, the L-bracket and top screws keep it dialed in horizontally and the two large front thumbscrews lock in the vertical position. Designed for the installation of a wide range of handles & knobs. Locating holes on door and drawer fronts has never been easier. An invaluable tool for the cabinet installer.
- ✅ Adjustable Punch Locator Saving Your Time: No need re-measuring when you drill, the jig cuts the hardware install time by 70%.Reversible fast drilling Even if the back can accurately locate accurate drilling
- ✅ Prime Quality Drill Guide, Made with high-quality stainless steel, aluminum, and ABS Plastic. It can give you enough intensity and a longer lifetime.
- ✅ Convenient Cabinet Hardware Jig, quick-release drill guide block makes set up simple, besides it comes with a storage bag. Dura-Scale, both Imperial and Metric
- ✅ACCURACY- 5mm hardened steel will help eliminate drilling mistakes with the hole for the drill bit. Great for all construction worker, professionals, and cabinet makers.
PACKAGE INCLUDES: 1 x Punch Locator Drill Guide
Eric S.
I had put in new kitchen cabinets and when I got the pulls I first was going to make a template to intsall them. When I looked on Amazon and saw this jig I ordered it immediately and it is a great tool. If you take your time in setting up the parameters and just hold the jig in place you get perfect holes every time. I used a squeezable clamp to help hold it in place. The guide holes are perfect for a 3/16" bit and appear to be of stainless steel or other hardened steel. The tool has both metric and inch markings so you can use either. I installed pulls on 4 drawers of different sizes and16 cabinets of two different sizes in less than 2 hours including setup with perfect holes every time. This definitely one of the better tools I have purchased. The storage case is nice to keep all the parts together.
Aaron B.
This drill guide worked very good. I had over 30 doors and drawers to drill and install handles in my kitchen. The guide works best with a 3/16" drill bit. If you have hard wood like I did (maple) I would also recommend a new drill bit. I also found clamping the guide to the drawer or door, makes the guide more stable. Just an inexpensive vice grip c clamp from harbor freight seemed to work fine (2 clamps). Overall this is a tool that you most people won't use very often, but it will make installing cabinet handles much easier.
Chase T.
I was dreading the thought of having to manually map out each cabinet to add pull-handles. Finding this drill guide is saving me hours. I measure once and set the spacing and I can do both left- and right-facing cabinets. Just flip it over and you have the opposite side! In the picture, it's the backside...flip it over and I can do the opposite cabinet. Perfect spacing every time. It's not a tool I'd use if I did this for a living (it is abs plastic after all), but for a DIY homeowner that will use this a few times, it is a great value.
Scarlet H.
I used the jig today to install 3 knobs and pulls in our upstairs bathroom and it worked great. I didn't have any issues with the set screws coming loose. As a handyman I won't be using it everyday, but it does make a great addition to the tool inventory.
Ellen M.
I'm a new home owner and needed something to help me install knobs to my drawers and cabinets. Have looked around and found this great tool. It's very easy to assemble and use. Every whole drilled was perfectly aligned. Rulers have measures in inches or cm. Have recommend it to my cousin since he will be getting a new home too and this jig will surely help him with drawers and cabinets.
Jon B.
Saved sooooo much time! And I didn’t even need to watch any tutorials — although I’m planning on doing that still.
Justine M.
This template was exactly what we needed to properly install our new kitchen hardware. We tried a different type of template first, and quickly realized we needed something better. We were so happy we bought this!! Once you set the guides, there is minimal room for error. I especially appreciated the guide for the drill bit - kept everything straight and didn't let the bit slip. This product saved us possibly hundreds of dollars, because we didn't have to reorder any doors or drawers due to drilling mistakes. I highly recommend this for hardware install!!
You may also like these products
Recently viewed products
Eric S.
I had put in new kitchen cabinets and when I got the pulls I first was going to make a template to intsall them. When I looked on Amazon and saw this jig I ordered it immediately and it is a great tool. If you take your time in setting up the parameters and just hold the jig in place you get perfect holes every time. I used a squeezable clamp to help hold it in place. The guide holes are perfect for a 3/16" bit and appear to be of stainless steel or other hardened steel. The tool has both metric and inch markings so you can use either. I installed pulls on 4 drawers of different sizes and16 cabinets of two different sizes in less than 2 hours including setup with perfect holes every time. This definitely one of the better tools I have purchased. The storage case is nice to keep all the parts together.
Aaron B.
This drill guide worked very good. I had over 30 doors and drawers to drill and install handles in my kitchen. The guide works best with a 3/16" drill bit. If you have hard wood like I did (maple) I would also recommend a new drill bit. I also found clamping the guide to the drawer or door, makes the guide more stable. Just an inexpensive vice grip c clamp from harbor freight seemed to work fine (2 clamps). Overall this is a tool that you most people won't use very often, but it will make installing cabinet handles much easier.
Chase T.
I was dreading the thought of having to manually map out each cabinet to add pull-handles. Finding this drill guide is saving me hours. I measure once and set the spacing and I can do both left- and right-facing cabinets. Just flip it over and you have the opposite side! In the picture, it's the backside...flip it over and I can do the opposite cabinet. Perfect spacing every time. It's not a tool I'd use if I did this for a living (it is abs plastic after all), but for a DIY homeowner that will use this a few times, it is a great value.
Scarlet H.
I used the jig today to install 3 knobs and pulls in our upstairs bathroom and it worked great. I didn't have any issues with the set screws coming loose. As a handyman I won't be using it everyday, but it does make a great addition to the tool inventory.
Ellen M.
I'm a new home owner and needed something to help me install knobs to my drawers and cabinets. Have looked around and found this great tool. It's very easy to assemble and use. Every whole drilled was perfectly aligned. Rulers have measures in inches or cm. Have recommend it to my cousin since he will be getting a new home too and this jig will surely help him with drawers and cabinets.
Jon B.
Saved sooooo much time! And I didn’t even need to watch any tutorials — although I’m planning on doing that still.
Justine M.
This template was exactly what we needed to properly install our new kitchen hardware. We tried a different type of template first, and quickly realized we needed something better. We were so happy we bought this!! Once you set the guides, there is minimal room for error. I especially appreciated the guide for the drill bit - kept everything straight and didn't let the bit slip. This product saved us possibly hundreds of dollars, because we didn't have to reorder any doors or drawers due to drilling mistakes. I highly recommend this for hardware install!!